冰河冷媒产品展示

LM-8?

载冷剂冰河冷媒

LM-8?

Composition and Properties

LM-8 is composed of modified organic acid salt. The main additives include corrosion inhibitors, solubilizers, stabilizing agents, and water stabilizer. Appearance is light-colored liquid. Density is 1.334~1.360g/cm3 at 20°C. Specific heat is 0.622cal/g·°C. Viscosity is 2.9mPa·s(cP). Heat conductivity is 0.47W/m·K. Boiling point above 110°C, and freezing point below -60°C. No flash point, low volatile, non-flammable, low toxicity.

Purpose and Usage

LM-8 coolant has low toxicity, non-flammable, strong cooling capacity, high heat ability, good anti-rust performance advantages.
Temperature range: -50°C ~ 100°C
LM-8 coolant can use as replacement of the traditional aqueous calcium chloride solution.
How to use: Clean the system before use, and then use directly. Do not mix with other coolant. Check the PH every 3 months. If the PH value is lower than the specified value, please contact us to adjust.

冰河冷媒載冷劑用于醫藥領域
Pharmaceutical
冰河冷媒載冷劑用于化工領域
Chemical
冰河冷媒載冷劑用于暖通空調領域
HVAC
冰河冷媒載冷劑用于其他領域
Aerospace
LM-8 参数表